Hard Wired Switched Input Module
- Product code : Ei129
- The Switched Input Module Is Designed To Connect To Volt Free Contacts (Normally Open And Common) That Are 230V AC Rated (e.g. A Flow Switch On A Sprinkler System Or Alarm Control Panel) : When the contacts close, it will interconnect with the smoke, heat or CO alarms in the system causing them to sound. The device is approved to BS EN60065:2002/A1:2006 and is CE marked
- Features 3 X 25mm : trunking knockouts for surface wiring and centre knockout for recess wiring
- The Switched Input Module Runs On 230V AC Mains Power And Has Built-in Tamper Proof Rechargeable Lithium Cells That Act As A Battery Back Up In The Event Of Mains Failure : These rechargeable cells are designed to have a 10-year life and outlast the life of the module itself, whilst providing up to 2 months of operation without mains power
- Temperature Range : 0°C to 40°C. Relative humidity: 0% to 95%.
- Any Combination Of 3000, 2110e, 160e And 140RC And 260 Series Smoke : heat and CO alarms can be interconnected to a maximum of 20 units (the Ei129 counts as one unit).
- Dimensions Of Unit : 141mm diameter x 25mm depth
- The Ei129 Is Designed To Be Either Remotely Sited Or Can Be Sited Under A Smoke : heat alarm by removing the cover plate and mounting the alarm base plate onto the unit.
- Weight Inclusive Of Packaging : 200g
- More Than One Ei129 Can Be Used On A System If Required On The Condition That No More Than 20 Units Are Used In The System : (1 x Ei129 counts as one unit).
- 5 Year : guarantee.
- Fitted With A 3-way : connector block for ease of wiring
- Manufactured : in Ireland
Color
Quantity
Product Description
The Ei129 is a mains powered Switched Input Module with rechargeable lithium cell back-up. It will trigger the alarms in a system if an external device is activated, such as a sprinkler system.
The Ei129 comes with a cover or can be mounted underneath an alarm.
When the volt-free contacts connected to the Switched Input Module are closed, all interconnected smoke, heat and CO alarms will sound.
When the device triggering the Switched Input Module resets (i.e. when the contacts switch back) it will automatically reset and all interconnected alarms will cease sounding.
Product Specifications
The Switched Input Module Is Designed To Connect To Volt Free Contacts (Normally Open And Common) That Are 230V AC Rated (e.g. A Flow Switch On A Sprinkler System Or Alarm Control Panel) | When the contacts close, it will interconnect with the smoke, heat or CO alarms in the system causing them to sound. The device is approved to BS EN60065:2002/A1:2006 and is CE marked |
Features 3 X 25mm | trunking knockouts for surface wiring and centre knockout for recess wiring |
The Switched Input Module Runs On 230V AC Mains Power And Has Built-in Tamper Proof Rechargeable Lithium Cells That Act As A Battery Back Up In The Event Of Mains Failure | These rechargeable cells are designed to have a 10-year life and outlast the life of the module itself, whilst providing up to 2 months of operation without mains power |
Temperature Range | 0°C to 40°C. Relative humidity: 0% to 95%. |
Any Combination Of 3000, 2110e, 160e And 140RC And 260 Series Smoke | heat and CO alarms can be interconnected to a maximum of 20 units (the Ei129 counts as one unit). |
Dimensions Of Unit | 141mm diameter x 25mm depth |
The Ei129 Is Designed To Be Either Remotely Sited Or Can Be Sited Under A Smoke | heat alarm by removing the cover plate and mounting the alarm base plate onto the unit. |
Weight Inclusive Of Packaging | 200g |
More Than One Ei129 Can Be Used On A System If Required On The Condition That No More Than 20 Units Are Used In The System | (1 x Ei129 counts as one unit). |
5 Year | guarantee. |
Fitted With A 3-way | connector block for ease of wiring |
Manufactured | in Ireland |
The Switched Input Module Is Designed To Connect To Volt Free Contacts (Normally Open And Common) That Are 230V AC Rated (e.g. A Flow Switch On A Sprinkler System Or Alarm Control Panel) | When the contacts close, it will interconnect with the smoke, heat or CO alarms in the system causing them to sound. The device is approved to BS EN60065:2002/A1:2006 and is CE marked |
---|
Features 3 X 25mm | trunking knockouts for surface wiring and centre knockout for recess wiring |
---|
The Switched Input Module Runs On 230V AC Mains Power And Has Built-in Tamper Proof Rechargeable Lithium Cells That Act As A Battery Back Up In The Event Of Mains Failure | These rechargeable cells are designed to have a 10-year life and outlast the life of the module itself, whilst providing up to 2 months of operation without mains power |
---|
Temperature Range | 0°C to 40°C. Relative humidity: 0% to 95%. |
---|
Any Combination Of 3000, 2110e, 160e And 140RC And 260 Series Smoke | heat and CO alarms can be interconnected to a maximum of 20 units (the Ei129 counts as one unit). |
---|
Dimensions Of Unit | 141mm diameter x 25mm depth |
---|
The Ei129 Is Designed To Be Either Remotely Sited Or Can Be Sited Under A Smoke | heat alarm by removing the cover plate and mounting the alarm base plate onto the unit. |
---|
Weight Inclusive Of Packaging | 200g |
---|
More Than One Ei129 Can Be Used On A System If Required On The Condition That No More Than 20 Units Are Used In The System | (1 x Ei129 counts as one unit). |
---|
5 Year | guarantee. |
---|
Fitted With A 3-way | connector block for ease of wiring |
---|
Manufactured | in Ireland |
---|
Fusce vitae nibh mi. Integer posuere, libero et ullamcorper facilisis, enim eros tincidunt orci, eget vestibulum sapien nisi ut leo. Cras finibus vel est ut mollis. Donec luctus condimentum ante et euismod.
Pellentesque habitant morbi tristique senectus et netus et malesuada fames ac turpis egestas. Suspendisse eget facilisis odio. Duis sodales augue eu tincidunt faucibus. Etiam justo ligula, placerat ac augue id, volutpat porta dui.
Sed id tincidunt sapien. Pellentesque cursus accumsan tellus, nec ultricies nulla sollicitudin eget. Donec feugiat orci vestibulum porttitor sagittis.